Well Pump Replacement Cost in 2026: New Pump Prices, Installed

Name: well pump replacement cost Data
License: https://creativecommons.org/licenses/by/4.0/

Replacing a well pump costs $974–$2,821, with a national average of $1,897 (Angi, 2026). A submersible pump runs $1,000–$2,500 installed and a jet pump $400–$1,400 (HomeGuide). Wells deeper than 150 feet cost $2,000–$10,000+ because of the extra pipe, wire and labor. If only a surface part such as a $120–$175 pressure switch has failed, repair it instead.

Well pump replacement costs $974 to $2,821 installed, averaging $1,897 (Angi, 2026) — and deep or difficult wells can reach $2,000–$10,000+ because drop pipe, wire, and pull labor all scale with depth. The pump itself is the smaller share: the unit alone retails for roughly $100–$1,200, and the rest of the bill is pulling the old pump and setting the new one.

Whether to repair or replace comes down mostly to the pump's age. Submersibles last 8–15 years and jet pumps 8–10, so a surface fix on a young pump is money well spent, while the same fix on an old pump is often a down payment on the replacement you'll need next season anyway.

Well Drilling Pros connects you with independent local pump pros who run the amp-draw and pressure tests before recommending a pull. The quiz below weighs your pump's type, age, and symptom the way a pro does — and the figures are 2026 national ranges from Angi, HomeGuide, HomeAdvisor, The Well Guide, and the other sources listed at the end of this guide.

Typical national range

$974 – $2,821

National average $1,897 (Angi, 2026). Wells over 150 ft: $2,000–$10,000+.

Cost breakdown

Item	Typical range	Notes
Full pump replacement (typical)	$974 – $2,821	National average $1,897 installed (Angi, Aug 31, 2026).
Submersible pump, installed	$1,000 – $2,500	The most common drilled-well pump; sits down in the well (HomeGuide, Aug 7, 2025).
Deep-well jet pump, installed	$500 – $1,400	Above-ground pump for wells 25–100 ft (HomeGuide, Aug 7, 2025).
Shallow-well jet pump, installed	$400 – $1,000	Above-ground pump for wells under 25 ft (HomeGuide, Aug 7, 2025).
Constant-pressure pump, installed	$2,000 – $5,000	Variable-speed pump for steady pressure (HomeGuide, Aug 7, 2025).
Pressure tank, installed	$300 – $700	Average $500. A waterlogged tank causes short cycling (Angi, Sep 18, 2026).
Labor (varies with depth)	$250 – $1,000	Pull labor at $45–$150/hr scales with well depth (Angi, Aug 31, 2026).
Deep-well replacement (over 150 ft)	$2,000 – $10,000	Drop pipe, wire, and pull labor all scale with depth (Angi, Aug 31, 2026).
Pump unit only (no installation)	$450 – $2,500	Pump alone: shallow jet $450–$900, deep jet $500–$1,200, submersible $1,000–$2,500+ (Angi, Aug 31, 2026).
Drop pipe (per foot)	$1 – $3	Per foot; often replaced with the pump (The Well Guide, Mar 2026).
Submersible wire (per foot)	$1 – $3	Per foot; often replaced with the pump (The Well Guide, Mar 2026).
Well pump repair (typical bill)	$373 – $1,624	Average $974 across 5,515 projects (Angi, Sep 15, 2026).
Emergency or weekend labor	$50 – $100	Per hour: $50 standard, $100 weekend or after hours, plus a $100–$150 house call (Angi, Sep 15, 2026). The Well Guide: emergency adds 25–50% to labor (Mar 2026).
Permits (where required)	$50 – $200	Varies by jurisdiction (HomeAdvisor, Jun 17, 2026).

What changes the price

Providers quote their own work — these are the factors that consistently move the number.

Pump type: a shallow-well jet pump runs $400–$1,000 installed, a deep-well jet $500–$1,400, and a submersible $1,000–$2,500 (HomeGuide), so the type you have sets the base replacement cost.
Well depth: pull labor, drop pipe, and wire all scale with depth. Angi's depth bands: under 25 ft is cheapest, 25–150 ft is typical, and over 150 ft runs $2,000–$10,000+.
Repair vs replace: on a pump under 8 years old the fix is usually a $120–$175 pressure switch or $300–$700 tank, not the pump itself — replacing early is the most common way homeowners overspend.
Pump age: submersibles last 8–15 years and jet pumps 8–10 (Angi); past that age, repairs that require a pull rarely pay off.
Access: a well in a pit, under a slab, or far from power adds labor beyond the standard range.
Sizing: a replacement should be matched to your well's specs and household demand, not blindly matched to the old pump — undersizing causes short cycling and early failure.

How much does a well pump cost without installation?

The pump alone costs $450–$1,500 for a shallow-well jet and $1,000–$2,500+ for a submersible (Angi, Aug 2026); labor adds $250–$1,000.

A new well pump by itself costs about $450–$900 for a shallow-well jet pump, $500–$1,200 for a deep-well jet pump, and $1,000–$2,500+ for a residential submersible, depending on horsepower, flow rate, and whether it's cast iron, thermoplastic, or stainless steel (Angi, Aug 31, 2026).

That's why the installed price is several times the sticker price. Installation adds $250–$1,000 on top of the pump: pulling the old unit, new drop pipe and wire where needed, fittings, and wiring the control box. Contractors bill $45–$150 an hour (Angi), and a replacement usually lands at $974–$2,821 all in.

How much does it cost to replace a submersible well pump?

A submersible replacement typically runs $1,000–$2,500 installed (HomeGuide, Aug 7, 2025). It's the standard pump for drilled wells and the only practical choice once the water level is deeper than about 100 feet, but because it hangs down the well, every replacement means pulling the pump, pipe, and wire back to the surface.

Depth sets the rest of the price. Each additional 100 feet of well adds roughly $500–$1,000 (The Well Guide), and drop pipe ($1–$3 per foot) and submersible wire ($1–$3 per foot) are often replaced while the pump is out. That's how a deep or hard-access well reaches $2,000–$10,000+. Ask for a quote that itemizes pipe and wire, so they don't show up as extras after the pump is pulled.

Does a deep well cost more than a shallow well?

Yes. Angi (Aug 31, 2026) breaks replacement cost into three depth bands: wells under 25 ft are the cheapest (jet pump above ground), wells 25–150 ft are typical, and wells over 150 ft run $2,000–$10,000+ because of the extra pipe, wire, and pull labor.

Jet pumps run $400–$1,400 installed (HomeGuide). Shallow wells, with water within about 25 feet of the surface, use an above-ground shallow-well jet pump — the cheapest replacement at $400–$1,000 installed. Wells from about 25 to 100 feet can use a two-pipe deep-well jet pump at $500–$1,400 installed. Both sit in a basement or well house, so there's nothing to pull from the well.

Past about 100 feet, a submersible is the answer, starting around $1,000 installed and rising with depth. If you don't know your well depth, the well pump size calculator uses your pumping water level to point you to the right pump type and horsepower before you ask for quotes.

How much does a deep well pump replacement cost?

Deep wells over 150 ft cost $2,000–$10,000+ (Angi, Aug 31, 2026). The extra cost comes from longer drop pipe and wire ($1–$3 per foot each, The Well Guide), more pull labor, and sometimes a higher-horsepower pump.

Hidden costs to ask about: a check valve ($50–$150), pitless adapter replacement ($150–$450), and emergency or weekend labor ($100/hr vs $50/hr standard, plus a $100–$150 house call fee, per Angi's Sep 2026 repair guide). Every 100 feet of depth adds roughly $500–$1,000 to the total (The Well Guide).

For a 500-ft Texas well, new pipe and wire alone run an estimated $1,000–$3,000 (calculated as $1–$3/ft × 500 ft × 2). That's on top of the pump and labor.

How much does a pump cost in a new well?

For a new well, budget $900–$2,500 for the installed pump and $400–$1,500 for the pressure tank (Angi, Sep 18, 2026; HomeAdvisor, Jun 19, 2026). The permit runs $200–$500 by jurisdiction.

These are the same figures our well drilling cost calculator uses. If you're drilling a new well, the pump system is usually quoted as part of the complete job. See the well drilling cost guide for per-foot rates by geology.

Should you replace the pump and pressure tank together?

Often, yes. ESTIMATE: replacing both typically totals $1,274–$3,521 (Angi replacement range $974–$2,821 plus Angi tank range $300–$700, added low to low and high to high). Doing them in one visit means one service call and one round of plumbing work, so ask for a combined quote.

A waterlogged tank makes the pump short-cycle, and those constant starts wear out the motor, so a pump that failed early may have been killed by the tank. Size the new tank to the new pump: a 10 GPM pump on a 40/60 pressure switch needs about 15 gallons of drawdown, which works out to an 85-gallon nominal tank. See the pressure tank size calculator.

What if the problem is the well, not the pump?

Most well repairs cost less than a new pump. A typical well pump repair bill runs $373–$1,624, averaging $974, and the common fixes are above-ground parts: a pressure switch ($120–$175 installed), a control box ($200–$500), or the pressure tank ($300–$700). That's why a diagnosis should come before any pump pull.

Sometimes the problem is the well itself: a dropping water table, a collapsed or corroded casing, or a well that no longer produces enough water. Casing repair and well replacement are driller jobs priced per foot, and a complete new well runs $3,000–$16,000 or more. See the well drilling cost guide for per-foot rates by geology. The no-water diagnostic can help narrow down the cause.

How we built these numbers

The short version. Every price on this page comes from a published, cited national cost guide. When no source publishes a figure we need, we make an estimate, label it as an estimate, and show how we got it. These are planning ranges, not quotes. This page is published by Cornelia Cove LLC.

How each range was built:

Headline range ($974–$2,821) and average ($1,897). Copied as published from Angi's well pump replacement cost guide (updated Aug 31, 2026), which reports them across 1,339 projects. The low and high are Angi's typical range. The average is Angi's published average. We didn't compute a median, and none is published.

Installed cost by pump type (e.g. submersible $1,000–$2,500). As published by HomeGuide (updated Aug 7, 2025), the only current source that publishes installed prices by pump type. Pump-only prices by type come from Angi (Aug 31, 2026) and are shown separately, because the two measure different things.

Cost by well depth (under 25 ft, 25–150 ft, over 150 ft). As published by Angi (Aug 31, 2026).

Repair costs by part (pressure switch, control box and others). As published by Angi's well pump repair cost guide (updated Sep 15, 2026). The repair average ($974, range $373–$1,624) is Angi's, across 5,515 projects.

Pressure tank ($300–$700, avg $500). As published by Angi (Sep 18, 2026).

Drop pipe and wire ($1–$3 per foot each), unit prices by horsepower, the 'every 100 feet adds roughly $500–$1,000' rule, and the 50 percent repair rule. As published by The Well Guide (updated March 2026).

Full spread across all jobs ($200–$5,800) and permits ($50–$200). As published by HomeAdvisor (updated Jun 17, 2026). Angi and HomeAdvisor are the same company, so we count them as one source and use the more recently updated page when both publish a figure.

New-well pump, tank and permit lines ($900–$2,500 pump; $400–$1,500 tank, installed; $200–$500 permit). The same figures as our well drilling cost calculator, from Angi (Sep 18, 2026) and HomeAdvisor (Jun 19, 2026) well drilling guides.

Deep Texas wells. The ~840-ft figure is the median pump setting in Texas Water Development Board driller reports for new McLennan County wells since 2016 (files dated Oct 9, 2026). It's the only median on this page, and we computed it from the public reports.

Date window. Every source page was published or updated between Aug 7, 2025 and Sep 18, 2026, and all were accessed Oct 11–12, 2026.

Estimates on this page (labeled where they appear): Pump + pressure tank in one visit ($1,274–$3,521) = Angi replacement range + Angi tank range, added low to low and high to high. New pipe and wire at a 500-ft setting ($1,000–$3,000) = The Well Guide's $1–$3 per foot × 500 ft × 2 (pipe and wire). Repair-or-replace calls in the part table = our rule of thumb from Angi's lifespans and The Well Guide's 50 percent rule, not a published threshold.

How we choose figures: As published. We copy a source's range exactly. We don't round, blend or adjust for inflation. One primary source per figure. When several sources publish the same figure, we use the most recently updated page. When sources disagree by a lot, we show both. Same numbers everywhere. This page, the embedded pump size calculator and our reports use the same figures.

Limits. These ranges are national, not local, and prices in your county can fall outside them. They aren't quotes, because we don't survey contractors. Depth, access, soil and local code all move real prices.

Reusing this data. The cost tables on this page are licensed CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). You can reuse them with attribution and a link back to this page. Suggested credit: Source: Well Drilling Pros, Well Pump Replacement Cost (Cornelia Cove LLC), https://welldrillingpros.com/cost/well-pump-replacement-cost

Corrections. Spot a wrong or outdated figure? Email partners@corneliacove.com. We check reported errors against the cited source, then update the page and its review date.

Last updated: October 2026. We refresh these tables at least once a year.

Repair or replace?

Repair when a single surface part has failed and the pump is under about 8 years old. Replace when the pump itself has failed, or when a repair that needs the pump pulled would cost more than half the price of a new pump (The Well Guide's 50 percent rule).

Surface parts cost far less than a pump (Angi, Sep 2026): pressure switch $120–$175, pressure gauge $100–$175, start capacitor $100–$150, control box $200–$500, foot valve $150–$300, pitless adapter $150–$450, pump sleeve $150–$400.

A failed pressure tank is a tank job: $300–$700, averaging $500 (Angi). A failed submersible motor usually means a new pump at $1,000–$2,500 installed (HomeGuide).

The 50 percent rule (The Well Guide, Mar 2026): if a repair requires pulling the pump and the repair cost exceeds 50 percent of full replacement cost, replace the pump. Submersibles last 8–15 years and jet pumps 8–10 (Angi). Past that age, repairs that need a pull rarely pay off.

For diagnosis and repair pricing, see the repair cost guide. The on-site quiz is at /tools/well-pump-repair-or-replace.

Frequently Asked Questions

How much does it cost to replace a well pump?

Most replacements run $977–$2,824, averaging about $1,900 installed. Jet pumps cost $400–$1,400 installed and submersibles $1,000–$2,500, with labor of $250–$1,500 on top depending on depth. Deep or hard-access wells can reach $5,650 or more.

How much does a new well pump cost?

The pump alone costs about $100–$1,200: roughly $100–$500 for a shallow-well jet pump, $175–$800 for a deep-well jet pump, and $200–$1,200 for a submersible. Installed, a new well pump usually costs $977–$2,824, because pulling the old pump, pipe, wire, and labor make up most of the bill.

How much does it cost to replace a submersible well pump?

Typically $1,000–$2,500 installed. Every additional 100 feet of depth adds roughly $500–$1,000 for pull labor, drop pipe, and wire, so deep or hard-access wells can reach $3,000–$5,650.

How much does it cost to replace a well pump and pressure tank?

About $1,400–$4,300 combined: $977–$2,824 for the pump plus $400–$1,500 for the tank, both installed. Doing both in one visit saves a second service call, and it's often worth it because a failing tank causes the short cycling that wears out pumps.

Should I repair or replace my well pump?

Age decides most cases. Under 8 years: repair — symptoms usually trace to a $150–$350 pressure switch or a $400–$1,500 pressure tank, not the pump. Over 12 years with symptoms: replace. In between, get both quotes and replace if the repair exceeds about a third of the replacement price.

How long does a well pump last?

Submersible pumps typically last 8–15 years and above-ground jet pumps 7–12. Water sediment, short cycling from a failing pressure tank, and frequent dry-running all shorten that. Past 12 years, most pros advise pricing a replacement alongside any repair.

How much does well pump repair cost?

The common repairs are cheap relative to replacement: a pressure switch runs $150–$350 installed and a pressure tank $400–$1,500. These surface components cause most of the pressure-loss and short-cycling symptoms on younger pumps, which is why a diagnosis should always precede a pump replacement.

What are the signs a well pump is going bad?

The classic five: dropping water pressure, short cycling (rapid on-off), faucets spitting air, a breaker that keeps tripping, and no water at all. Each can also be caused by a cheaper component — the pressure switch or tank — which is why a diagnosis should always precede a pump replacement.

Can a plumber replace a well pump?

A general plumber can replace an above-ground jet pump, but submersible pumps usually require a well pump specialist. Submersibles hang hundreds of feet down the well on drop pipe and wire, and pulling them requires a hoist or pulling rig most plumbers don't carry. For a shallow-well jet pump sitting in your basement, any licensed plumber can do the work.

Can I replace a well pump myself?

You can replace a shallow-well jet pump yourself if you're comfortable with plumbing and electrical work — the pump sits above ground, typically in a basement or well house. Submersibles are a different story: you need a hoist or pulling rig to lift the pump, pipe, and wire, and improper handling can drop the pump down the well. Most homeowners hire a pro for submersibles.

Does homeowners insurance cover a well pump?

Typically not for normal wear and tear. Standard homeowner policies cover sudden, accidental damage — a lightning strike that fries the motor, for example — but not a pump that wore out over time. Check your policy's equipment breakdown endorsement if you have one, and consider a home warranty for routine failures.

Estimates only — independent local providers quote their own pricing. Data last reviewed 2026-10.

Sources

Related services

Related cost guides

Prefer to just talk to someone?

Send the short form — we'll route you to an independent local pro.

Request a Quote

Well Pump Replacement Cost in 2026: New Pump Prices, Installed

Cost breakdown

What changes the price

How much does a well pump cost without installation?

How much does it cost to replace a submersible well pump?

Does a deep well cost more than a shallow well?

How much does a deep well pump replacement cost?

How much does a pump cost in a new well?

Should you replace the pump and pressure tank together?

What if the problem is the well, not the pump?

How we built these numbers

Repair or replace?

Frequently Asked Questions

Related services

Related cost guides

Free tools for this job

Well Pump Size Calculator

Pressure Tank Size Calculator

Well Pump: Repair or Replace? Decision Quiz

No Water From Your Well? Diagnostic Wizard

Counties We Serve