Well Drilling
New residential wells — find local drillers for site evaluation, depth estimates, and written drilling quotes.
- Mark no-water pump problems as emergencies on the form
- County pages on local well depths, aquifers, and permits
- Well inspections, water testing, and treatment
- Free to use — no obligation, no markup
Fast response from independent local providers. No obligation.
Typical national cost$3,000 – $16,000Cost guide →About Well Drilling
Drilling a new well is a serious project: real money, permanent infrastructure, and outcomes that depend heavily on local geology. The right local driller knows the aquifers under your county — typical depths, expected yields, and where neighbors hit water — before the rig ever shows up.
Describe your property and water needs, and we'll pass your request to independent local well drilling contractors. Ask any driller for their state license number. You get a site conversation and a written quote; there's no obligation and we're not the contractor.
Common Jobs We Route
- New residential water wells for homes and homesteads
- Replacement wells when an existing well fails or runs dry
- Wells for new-construction homesites before build
- Irrigation wells for gardens, small farms, and livestock
- Deepening or re-drilling existing low-yield wells
- Geothermal boreholes (where drillers offer it)
What Affects the Price
Providers quote their own work — these are the factors that consistently move the number.
- Depth is the dominant cost driver — most drillers price per foot, and required depth is set by your local water table and geology
- Casing length and diameter: deeper unstable formations need more casing, which is priced per foot on top of drilling
- Rock vs. soil drilling: hard-rock formations drill slower and cost more per foot than sand or clay
- Site access: tight lots, steep grades, and soft ground affect rig placement and cost
- Pump system and pressure tank are typically quoted separately from the borehole
- Permits, water testing, and grouting requirements vary by county and state
How It Works
- Step 1
Describe your property
County, lot type, water needs (household size, irrigation, livestock), and any neighbor well info you know.
- Step 2
Connect with a local driller
We pass your request to independent local well contractors. Check their state license and ask what nearby wells show.
- Step 3
Site evaluation & quote
The driller assesses the site, estimates depth from local well logs, and gives a written per-foot quote.
- Step 4
Drill, case, and test
Drilling, casing, grouting, pump installation, and a yield/water-quality test to finish the job.
Free Well Drilling Tools
Get a realistic number or a quick diagnosis first — free, built on published industry data.
Compare your options
Well Drilling FAQs
How much does it cost to drill a well?
Nationally, most residential wells land between $25 and $65 per foot drilled and cased, so a 300-foot well often runs $8,000–$20,000 including a standard pump system — but local geology moves this a lot. Get a written per-foot quote from a driller who knows your county's typical depths.
How deep will my well need to be?
It depends on the aquifer under your property. Your county's well logs are the best predictor — local drillers reference nearby wells they've drilled. Our market pages list typical depth ranges by county as a starting point.
Do I need a permit to drill a well?
Almost everywhere, yes — usually issued through the county health department or a state water agency, and typically handled by the licensed driller as part of the job. Confirm the permit is included in your quote.
How long does drilling take?
The drilling itself is often 1–3 days for a typical residential well, plus pump installation and water testing. Scheduling lead time — often a few weeks in busy seasons — is usually the longer wait.
Well Drilling by Area
Need well drilling?
Send the short form — no obligation.